40-151 SLP Magnum Polaris Force Clutch Weights 65g-72.8g

Section: B-15

40-151 SLP Magnum Force Clutch Weights 65g-72.8g
Manufacturer: Starting Line Products
Part Number: 40-151
Condition: New
The Magnum Force™ weight is the latest clutching technology, improving the clamping efficiency of the weight (especially at low to mid speed ranges). It utilizes external adjustability by means of a gun drilled and threaded center core, where mass can be added or subtracted without removing the weight from the clutch.

This new weight works through its unique mass distribution profile, combining maximum shift force on the low end with excellent top end performance. Its striking profile utilizes our most efficient heavy heel design yet, with instant response and increased acceleration that are sure to satisfy any performance-hungry rider. This weight does it all, aggressive shift profile with ease of tuning.

Magnum Force™ Weights Part #40-151 3 - Clutch Weights (65g empty, 72.8g fully loaded) 18 - Set Screws (1.2g ea.) 4 - Lock Sets (0.6g ea.) 1 - T-Handle Allen Weights can be adjusted by adding or subtracting set screws to achieve desired peak RPM. When using 1 or more set screws a lock set MUST be used. Maximum 6 set screws and one lock set per weight. Adding Set Screws: With the cup point of the set screw pointed into the weight, use the T-Handle Allen wrench to drive set screw in until it bottoms out in the weight. Add the desired number of set screws, bottoming each one to the other. Then drive in lock set until it bottoms on the set screw and tighten it up to lock in place.
(verify fitment using your model or serial number)